<?sphp $this->text('pagetitle') ?>
 
Home of the Squeezebox™ & Transporter® network music players.

SUSE 9.1 startup scripts

From SqueezeboxWiki

Revision as of 12:41, 25 June 2010 by Soulkeeper (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

From PascalCheffers list post - Jul 30, 2004

#! /bin/sh# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany.# All rights reserved.## Author: Kurt Garloff# Please send feedback to http://www.suse.de/feedback/## /etc/init.d/slimserver#   and its symbolic link# /(usr/)sbin/rcslimserver#### BEGIN INIT INFO# Provides:          slimserver# Required-Start:    $syslog $remote_fs# Should-Start: $time ypbind sendmail# Required-Stop:     $syslog $remote_fs# Should-Stop: $time ypbind sendmail# Default-Start:     3 5# Default-Stop:      0 1 2 6# Short-Description: SlimServer Free your music!# Description:       Slim Devices introduces SlimServer, our powerful#      and free Open Source software. Not only will it power Squeezebox,#      but it also serves the SLIMP3 network music player or any software#      MP3 player on your network. SlimServer runs on Windows, Mac, Linux,#      BSD and Solaris.### END INIT INFO## Any extensions to the keywords given above should be preceeded by# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB.### Note on runlevels:# 0 - halt/poweroff 			6 - reboot# 1 - single user			2 - multiuser without network exported# 3 - multiuser w/ network (text mode)  5 - multiuser w/ network and X11 (xdm)## Check for existence of needed config file and read itSLIMSERVER_CONFIG=/etc/sysconfig/slimservertest -r $SLIMSERVER_CONFIG || { echo "$SLIMSERVER_CONFIG not existing";	if [ "$1" = "stop" ]; then exit 0;	else exit 6; fi; }# Read config. $SLIMSERVER_CONFIG# Check for missing binaries (stale symlinks should not happen)# Note: Special treatment of stop for LSB conformanceSLIMSERVER_BIN=$SLIMSERVER_HOME/slimserver.pltest -x $SLIMSERVER_BIN || { echo "$SLIMSERVER_BIN not installed";	if [ "$1" = "stop" ]; then exit 0;	else exit 5; fi; }# Source LSB init functions# providing start_daemon, killproc, pidofproc,# log_success_msg, log_failure_msg and log_warning_msg.# This is currently not used by UnitedLinux based distributions and# not needed for init scripts for UnitedLinux only. If it is used,# the functions from rc.status should not be sourced or used.#. /lib/lsb/init-functions# Shell functions sourced from /etc/rc.status:#      rc_check         check and set local and overall rc status#      rc_status        check and set local and overall rc status#      rc_status -v     be verbose in local rc status and clear it afterwards#      rc_status -v -r  ditto and clear both the local and overall rc status#      rc_status -s     display "skipped" and exit with status 3#      rc_status -u     display "unused" and exit with status 3#      rc_failed        set local and overall rc status to failed#      rc_failed   set local and overall rc status to#      rc_reset         clear both the local and overall rc status#      rc_exit          exit appropriate to overall rc status#      rc_active        checks whether a service is activated by symlinks#      rc_splash arg    sets the boot splash screen to arg (if active). /etc/rc.status# Reset status of this servicerc_reset# Return values acc. to LSB for all commands but status:# 0	  - success# 1       - generic or unspecified error# 2       - invalid or excess argument(s)# 3       - unimplemented feature (e.g. "reload")# 4       - user had insufficient privileges# 5       - program is not installed# 6       - program is not configured# 7       - program is not running# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)## Note that starting an already running service, stopping# or restarting a not-running service as well as the restart# with force-reload (in case signaling is not supported) are# considered a success.case "$1" in    start)	echo -n "Starting SlimServer "	## Start daemon with startproc(8). If this fails	## the return value is set appropriately by startproc.	startproc -u $SLIMSERVER_USER $SLIMSERVER_BIN $SLIMSERVER_ARGS	# Remember status and be verbose	rc_status -v	;;    stop)	echo -n "Shutting down SlimServer "	## Stop daemon with killproc(8) and if this fails	## killproc sets the return value according to LSB.	killproc -TERM $SLIMSERVER_BIN	# Remember status and be verbose	rc_status -v	;;    try-restart|condrestart)	## Do a restart only if the service was active before.	## Note: try-restart is now part of LSB (as of 1.9).	## RH has a similar command named condrestart.	if test "$1" = "condrestart"; then		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"	fi	$0 status	if test $? = 0; then		$0 restart	else		rc_reset	# Not running is not a failure.	fi	# Remember status and be quiet	rc_status	;;    restart)	## Stop the service and regardless of whether it was	## running or not, start it again.	$0 stop	$0 start	# Remember status and be quiet	rc_status	;;    force-reload)	## Signal the daemon to reload its config. Most daemons	## do this on signal 1 (SIGHUP).	## If it does not support it, restart.	echo -n "Reload service SlimServer "	## if it supports it:	killproc -HUP $SLIMSERVER_BIN	#touch /var/run/SLIMSERVER.pid	rc_status -v	## Otherwise:	#$0 try-restart	#rc_status	;;    reload)	## Like force-reload, but if daemon does not support	## signaling, do nothing (!)	# If it supports signaling:	echo -n "Reload service SlimServer "	killproc -HUP $SLIMSERVER_BIN	#touch /var/run/SLIMSERVER.pid	rc_status -v	## Otherwise if it does not support reload:	#rc_failed 3	#rc_status -v	;;    status)	echo -n "Checking for service SLIMSERVER "	## Check status with checkproc(8), if process is running	## checkproc will return with exit status 0.	# Return value is slightly different for the status command:	# 0 - service up and running	# 1 - service dead, but /var/run/  pid  file exists	# 2 - service dead, but /var/lock/ lock file exists	# 3 - service not running (unused)	# 4 - service status unknown :-(	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)	# NOTE: checkproc returns LSB compliant status values.	checkproc $SLIMSERVER_BIN	# NOTE: rc_status knows that we called this init script with	# "status" option and adapts its messages accordingly.	rc_status -v	;;    probe)	## Optional: Probe for the necessity of a reload, print out the	## argument to this init script which is required for a reload.	## Note: probe is not (yet) part of LSB (as of 1.9)	test /etc/slimserver.conf -nt /var/run/slimserver.pid && echo reload	;;    *)	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"	exit 1	;;esacrc_exit